| Rated Input |
6 W (for 100 V line), 3 W (for 70 V line) |
| Rated Impedance |
100 V line: 1.7 kΩ (6 W), 3.3 kΩ (3 W), 6.7 kΩ (1.5 W), 13 kΩ (0.8 W)
70 V line: 1.7 kΩ (3 W), 3.3 kΩ (1.5 W), 6.7 kΩ (0.8 W), 13 kΩ (0.4 W) |
| Sensitivity |
90 dB (1 W, 1 m, 330 Hz - 3.3 kHz, pink noise) |
| Frequency Response |
160 Hz - 16 kHz (20 dB below peak) |
| Speaker Component |
12 cm (5") cone-type |
| Applicable Cable |
600 V vinyl-insulated cable (IV wire or HIV wire)
Solid copper wire: φ0.8 - φ1.6 mm (equivalent to AWG 20 - 14)
7-core twisted copper wire: 0.75 - 1.25 m㎡ (equivalent to AWG 18 - 16) |
| Connection |
Push-in connector (bridging terminal) |
| Operating Temperature |
-10 ℃ to +50 ℃ (14 ゜F to 122 ゜F) |
| Water Protection |
IPX4 (conforms when the unit is installed to a flat horizontal ceiling.) |
| Finish |
Front case, Rear case:
Fire-resistant HIPS resin (resin material grade: UL94V-0), light gray
Speaker mounting bracket: Surface-treated steel plate, off-white, powder coating |
| Dimensions |
φ220 × 80.5 (D) mm (φ8.66" × 3.17") (unit only, excluding projection)
φ150 × 5 (D) mm (φ5.91" × 0.2") (speaker mounting panel, excluding mounting screw) |
| Weight |
890 g (1.96 lb) (unit only), 180 g (0.4 lb) (speaker mounting panel) |
| Accessory |
Speaker mounting panel …1, Switch box mounting screw (M4 × 35) …2,
Ceiling mounting screw (4 × 35) …2, Knob nut …2 |
