Frequency Range |
52 Hz–18 kHz ±3 dB
45 Hz–20 kHz -10 dB |
Nominal Dispersion |
80° H x 60° V @ -6 dB points, rotatable |
Max SPL (peak) |
130 dB peak
|
Crossover type
|
Active |
Transducers |
1 x 12" (308.5mm) LF Driver
1 x 1" (25.4 mm) HF compression driver
|
Limiter |
Independent HF, LF, peak and rms |
Maximum output power* |
2,500 W |
Type |
Class-D |
Protection |
Short circuit,open circuit, thermal |
Input A / B |
2 x combo jack/XLR |
Sensitivity |
Line +4 dBu, mic -22 dBu, switchable |
Input impedance |
20 kΩ unbalanced, 40 kΩ balanced |
Maximum input level |
+21 dBu |
Output A / B |
2 x XLR Linked to input |
Mix output |
XLR, balanced |
Output impedance |
100 Ω unbalanced, 200 Ω balanced |
Ultranet input/link |
2 x RJ45
|
Mains Supply |
Neutrik powerCON input 20A and link 15A |
DSP |
Rotary push-encoder
Buttons for PROCESS, SETUP, EXIT, ENTER |
Mixer section |
2 x gain controls (channels A and B)
2 x Line/Mic switch |
Factory EQ presets |
Positioning, Sound mode, Sound modeling ,FBQ |
Display |
LCD 128 x 32, blue backlit |
Delay |
0 - 300 ms |
Equalisation |
High and low shelving EQ
2 x parametric EQ |
Limiter |
Zero attack input limiter |
Presets |
20 total presets, 19 user-definable |
Crossover |
High pass L-R 24 dB/oct |
Protection |
Lock-out function for all settings |
A/D conversion |
24-bit,44.1/48kHz sample rate |
Converter type |
24-bit,delta-sigma |
Signal |
16 channels |
Latency |
<0.9 ms |
Frequency response |
20 Hz to 20 kHz (+0 / -3 dB) |
Dynamic range |
typical 92 dB |
Cables |
Shielded CAT5 |
Cable length |
max. 246 ft / 75 m recommended |
Power consumption |
150 W @ 1/8 max power |
Voltage (fuses) |
220-240 V~, 50/60 Hz (T 10 A H 250 V) |
Dimensions HWD |
609 x 370 x 370 mm (24.0 x 14.5 x 14.5") |
Net weight |
21.1 kg (46 lbs) |
Construction |
Injection-moulded polypropylene enclosure |
Finish |
Black painted |
Grille |
Powder coated perforated steel |
Flying hardware |
M10 x 3 points |
Accessories |
IQ12-WB Steel wall bracket |