Specifications

Scarlett Studio HP60 Headphones

• Reference quality headphones
• Extended frequency response
• Adjustable fit
• Closed back design to prevent audio spill when recording
• Mini-jack to 1/4" jack adapter included

Scarlett Studio CM25 microphone

• Large-diaphragm condenser microphone
• 3 m red cable included
• Mic stand adaptor

Scarlett Studio Scarlett 2i2

• 2 in / 2 out USB audio interface
• 96 KHz, 24-bit conversion
• 2 Focusrite microphone preamplifiers
• Red anodised aluminium unibody chassis

Front panel

• 2 line/mic/instrument combination inputs – high quality XLR/¼” TRS Jack Combo
• 2 Line/Instrument switches
• 2 Gain knobs
• 2 Gain halo signal indicators
• 48V Phantom power switch
• Direct monitor switch
• Large monitor level dial
• USB Connection LED indicator
• Headphone output - ¼” TRS Jack
• Headphone level knob

Rear panel

• 2 balanced monitor outputs – ¼” TRS Jack
• USB 2.0 Port
• Kensington Lock slot

Included software

• Steinberg Cubase LE 6
• Focusrite Scarlett plug-in suite

Analogue Input Performance
Mic
Frequency Response	20Hz - 20kHz +/- 0.1 dB
THD+N	< 0.002% (minimum gain, -1dBFS input with 22Hz/22kHz bandpass filter)
Equivalent Input Noise (EIN)	< -120dB: measured at 55dB of gain with 150Ω termination (20Hz/22kHz bandpass filter)
Gain Range	+10dB to +55dB
Max Input Level	-3dBu
Line
Frequency Response	20Hz - 20kHz +/- 0.1dB
THD+N	< 0.002% (measured with -1dBFS input and 22Hz/22kHz bandpass filter)
Noise	-90 dBu (22 Hz/22KHz bandpass filter)
Signal to Noise Ratio	> 100dB
Gain Range	-10dB to +35dB
Max Input Level	+20dBu
Instrument
Frequency Response	20Hz - 20kHz +/- 0.1dB
THD+N	0.005% (measured with -8dBu input and 22Hz/22kHz bandpass filter)
Noise	-87dBu (22Hz/22kHz bandpass filter)
Gain Range	+10dB to +55dB
Max Input Level	-3dBu
Analogue Output Performance
Nominal Output Level	0dBFS = 10dBu, balanced
Frequency Response	20Hz - 20kHz +/- 0.2dB
THD+N	< 0.001% (measured with 0dBFS input 22Hz/22kHz bandpass filter, un-weighted)
Output Impedance	< 10Ω
Power Output into 150Ω	15mW
Power Output into 50Ω	30mW
Digital Performance
Clock sources	Internal clock only
A-D Dynamic Range	105dB 'A-weighted' (all inputs).  Converter chipset A-D dynamic range 114dB
D-A Dynamic Range	104dB 'A-weighted' (all outputs).  Converter chipset D-A dynamic range 114dB
Supported sample rates	44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz
Crosstalk
Input to Input	Better than 90dB
Output to Output	Better than 90dB
Input to Output	Better than 85dB
Input Metering
Ring LED lit Green	Signal present (-24 dBFS)
Ring LED lit Red	Signal overload (0dBFS), peak held for approximately 1 second
Weight and Dimensions
Height	45 mm / 1 ¾ “
Width	175 mm / 7”
Depth	100 mm / 4”
Weight	580 g / 1.3 lbs